Aceeca has just changed the version number of the update to 600
Aceeca is one of the few manufacturers who still release firmware updates for their devices regularly. Unlike other companies, they also provide detailed change logs – in case anyone of you owns an Aceeca Meazura, please head over to Aceeca.com and get an update changing the following:
-Corrected battery dip issue which would turn the device off requiring two key presses on power to turn it back on again
-Corrected the screen blanking issue.
-Corrected issue where if device is on charger and battery is removed the charger would cause a high voltage on VBatt.
-If battery ID is wrong and plugged in, the device will now show plugged-in charging inhibited. Previously was showing not plugged-in and not charging which was confusing.
-Modified KeyCurrentState to query the keypad controller each time it is called, instead of just looking up a global. This way it is reflective of the key directly, not based on the global being updated.
-Increased the robustness of communications between the main processor and the keypad processor.
-Updated ROM to incorporate MeazuraLib_v306.
-This ROM now incorporates telephony APIs and SMS application.
-Modified serial driver to have added turn on delay time to ensure that the transceiver starts up correctly.
P.S. As usual for Aceeca – this is a free upgrade available to every Meazura owner, worldwide!
P.S.2 Kudos to the boys for their excellent customer care!
Related posts:
