- color: Navy Blue (+10$)
- clip: belt loop (+4$)
- style of the Fortte logo: Silver Tone
- no personalization
________________
whole case: $ 38.99

Finally the case looks like that:

The Treo fits exactly into the case and stays there, even if you open it and hold it upside-down:

When the Treo is inserted, the case stays small and handy. In that way you nearly won’t realize that it is there when it is attached to your belt.

And that’s how it looks from the back:

During my test I noted the following things:
Pros:
- very durable and significant case (made from real leather)
- stylish look and feel
- small in size

Cons:
- As the case is opened on the top it can be difficult to get your Treo when the case is under your jacket
- The case has no place for a SD card. So you have to look for an alternative place when you use more than one SD card.

The case is available via Fortte – the price starts at $24.99. In my opinion the case is worth its money
http://www.fortte.com/scr/showproduct.php/9?type=0

The case consists of leather and a piece of aluminium in the lid which gives some extra stability and protects the screen from crushes. In addition the lid holds a small pocket for one SD or MMC card.

At the back you can find a small hole with a screw for the belt clip which consist of two parts: a small part which can be clipped to you belt and another part which will be attached to the back of the case. To do so unscrew the screw and fasten the part of the clip. Be sure that it is attached strong enough.

Insert you Treo into the case by simply pushing the device into the clamps – they are strong enough to keep it in place. Now you can close the case and clip it into the clip. To remove the case from the belt simply push at the button on top of the belt device. This removes the lock and you can pull the case out of the clip.

But what when you want to use the camera or you have to perform a reset?
In the first case you have to remove the Treo from the case as it does not have a hole for the camera eye. If you do not want to remove it you can try to pull down the lid as much as possible so that nothing of the case is in the picture. But here it depends on how you placed you Treo in the case.

For a reset you have to remove the Treo out of the case (even if you have got a small hole in the battery lid which should avoid opening it) in order to open the battery lid which gives access to the reset button.

So lets have a look at the results:
Pro:
- good manufactured
- very good screen protection because of aluminium lid
- easy to attach/remove from belt
- appearence significant

Cons:
- camera can be difficult to use
- only one pocket for one SD card

The case costs 26.95 £ (~42$ / 33€) and is available via Proporta:

The proporta leather case (proporta.com)

Fortte’s products ship via FedEx in a huge box. The huge box contains a tiny blister:

Getting the Centro into the case is easy – it can be slid in from the top:

Counter-intuitively, the screen must face to the back of the case. While this may be weird, it is reasonable – this design allows the back of the machine to act as a “buffer” against impacts:

Unfortunately, the buckle can scratch over the screen when inserting the device:

The cut-out at the back is intended for the speaker – it allows ring tones to get out unmuffled:

The ringer switch at the top of the box can be accessed while in the case:

True to tradition, Fortte included a cutout for headphones. While the gesture is appreciated, it turns out to be useless due to the headphones having to be removed when taking the Centro out of the case.

The belt clip is attached to the case and is of excellent quality:

Please keep in mind that this case is hand-made and built to order. You can choose from an ever-growing number of colors, styles and varieties…look at the Fortte web site for further information. BTW: if you want to omit the belt clip: it can be done!

In the end, the STiL Vertical Pouch makes an excellent holster case for holster case fans. As usual, the case is immaculately done and can be customized like all other Fortte cases. The steep price of up to 70$ is justified due to the customizability…

Fortte’s products ship via FedEx from the United States. Unfortunately, the Austrian Customs catch the parcels from time to time…

A small blister protects the case during transportation:

Our case was ordered with belt clip (as it is intended to be given away). The belt clip thus ships in a small satchel along the case. People who dislike belt clips can order their cases without one – the screw in the back is then omitted:

Getting the Centro into the case is easy. The device is slid in, and a clip in the back is then closed. Fortte’s method is more secure than the friction locking systems found in other manufacturer’s offerings:

The device remains perfectly usable while in the case:

Fortte did a great job at keeping the keyboard usable:

The controls at the top and the bottom remain fully functional:

A cutout on the left side keeps the volume buttons accessible:

The Centro’s memory card door is badly designed and requires you to remove the battery door when swapping memory cards. Thus, Fortte chose to cover up the “slot” – no functionality lost.

Finally, here are a few shots showing the Centro next to a QTek 8500 in a pink case. Of course, the case color can be chosen from dozens – the list is available at Fortte’s web site.

In the end, Fortte’s case for the Palm Centro is excellent. People who wish to be able to design their case from the ground up can now do so – but have to accept a higher price. The case we reviewed here costs about 80$…but is worth every penny…

As usual, Proporta’s products ship in cushioned envelopes via regular mail. The envelopes originate in England and can be delivered to post boxes when you’re not at home:

The case itself drops in a special blister for extra protection.

Getting the Centro into the case is easy: just shove it into the clamps from above. Even though they may not look particularly trustworthy, they provide excellent security and manage to hold the device well even when toppled around/shaken:

Proporta did a great job at keeping the device usable even when in the case – the keyboard is not obstructed at all.

A cutout at the back allows you to access all important functions – camera and speaker are not obstructed:

The volume keys and the infrared port at the sides of the machine can be accessed. One of the clamps blocks the memory card slot: while this prevents loss, it also makes the already obscenely difficult memory card swap procedure even more annoying:

Finally, here’s a picture of the Centro in its case. The Proporta logo is cut out of thin steel and glued on btw:

In the end, Proporta’s Centro case is like almost all other Proporta products: excellent. There’s little not to like here – the price of 35$ is low compared to other manufacturers offerings…

The manufacturer of the case is a small German company known as FreaQs, the case shown in the example above is a SteQzwo for a Treo 680. The case’s color can be customized in wide ranges – the images below show one of the stock colors:

Last but not least, here are two pictures of the M70 in the case:

Even though the company currently does not have an English web site(order per email), the price of less than 40€ definitely is a worthwhile investment in keeping your M70 safe!

Foreward — This is just a guide containing a few hardware mods I’ve seen done over time. I’ve talked with the folks who’ve originally done these mods for more info than their original posts, so hopefully I don’t cause too much chaos

This one focuses on the modifications that can be done to the official Palm hardcase available for the T|X, T|E, T|E2 and the T|T5.

—

– The Magnet Mod –

My quest for the perfect hard case started in May. I was dissatisfied with the state of my T|X’s hard case, and was looking for an alternative. My main problem was that the chintzy little clasp that held the case shut had snapped loose and would not keep my T|X safe. After a bit of discussion, we decided that replacing the clasp with magnets was a viable alternative.

The first step is to drill out the holes. Since I never really figured I’d be doing this sort of post 7 months later, I have no “in progress” shots, sorry .

Make sure you choose magnets before you drill the holes so that you don’t end up with a big gaping hole in your case. The best thing I have learned is that if you make the hole a tad bit smaller than your magnets, then slowly file it out with anything fairly sharp (Hell, a small flat-head screwdriver works) you will have a nice snug fit that will never require reglueing.

After you drill the holes (I did four, two on each half of the case) you can drop the magnets in. The best ting to do is use a pair of tweasers and coat the magnet with gorilla glue then you simply wedge the magnets in the holes and you are done!

– Anti Rattle Mod–

“So, uh, Ryan, why do you have pieces of dish towels glued to your case?”

Good question! (I’m sorry, I know that’s bad ) The case is designed just kludgingly enough so that there is a very smaller, probably less than 1mm gap between the T|X and the case lid, just enough to have it rattle around and scuff up the front of the the T|X. Jays333 originally gave me the idea to do this in the above 1src thread, however I didn’t have any of that foam lying around, so I simply cut up a dish towel.

Jays333 did a nice job on his however:

This effectively cancels out any rattling that may occur, keeping your T|X unscathed for years to come.

– Headphone Mod –

So, what else can be done to our T|X cases? Well, I have done a few other things to the case in the time I’ve owned it. When I performed the Magnet Mod I also decided to cut away a hole for the headphones so that the case would latch shut when I was listening to music, rather than mashing up my headphone jack.

The first step is to mark where you want to get the cuts. You can plug in the headphones and put the device in the case so that the headphones are where the cuts will be (at which point, you know where the cuts need to be, or you can wing it with a sharpie cap, like Chris Tengi did.

—

That’s all of the mods I could come up with in regards to the Palm Hardcase. Next time we will take a look at alternatives to the Palm Cradle: the design, construction and customisation of our own Cradle kit!

Also, if you try any of these mods please note that I cannot be held responsible if your case is permanently damaged! Perform these mods at your own risk! 

Proporta still sticks to mailing out cases in traditional envelopes. While envelopes do offer less protection than their boxy counterparts, almost all post services drop them off in your mail slot. Please rest assured – I have tested products for ages and never had any problems with envelope deliveries…

The case itself ships in Proporta’s typical blister with the obligatory belt clip. For me, belt clips are completely useless(I distrust them to some extent)…however, the company still gives one away complimentary with each case.

Getting the Treo into the case is easy – slide it into the clamps from the top. These clamps hold the Treo surprisingly well…but getting the machine out for a reset/battery change is still very easy.

The lid of Proporta’s eeker is held in place by a magnetic clip system. It traditionally was a bit problematic..and the strap is still a bit too short for my liking. However, the situation has drastically improved from the past…:

As usual, the lid contains spaces for two SD cards and a bit of paper:

Originally, Proporta’s cases for Treo 680 had to be folded back in order to use the Treo’s camera. Version 2 of the case now has a cutout in the back – the folding orgies shown on the left are no longer necessary:

The case does not obstruct access to any buttons, the keyboard or the Treo’s sync port – flip top leather cases classically are unobtrusive…

The only real weakness I found while using this case is that the SD slot is covered up by one of the clamps. However, removing the Treo from the case is very easy, making this a forgivable ‘offense’.

Overall, leather cases cannot verse aluminum cases in terms of protectiveness – but they also don’t get into your way as much as aluminum cases would. If you can live with the minor weaknesses outlined above, get the case for 35$ at Proporta’s!

This time, Boxwave shipped the case in a cardboard box – in the past, products arrived in envelopes(unharmed). Anyways, no transport damages…no issues here(except that some postal services do not deliver parcels to a mail box and send a postman instead, which usually comes when you aren’t at home…).

Getting the Treo into the case is easy – put the front shell onto it and press the back shell on, causing the latches to lock. Getting the Treo out goes the other way round…and is less easy:

The case has generously-sized cutouts for screen and keyboard – it doesn’t get in the way while using the machine:

The back of the case contains cutouts for the camera, speaker, auxiliary belt clip and stylus silo. Neither audio nor camera operations are affected if the Treo is in the case.

Cutouts at the sides allow you to access all relevant Treo functions:

The cutout at the bottom is well thought-out; as it is perfectly aligned with the Treo’s sync port. This allows you to connect the Treo to almost all peripherals while remaining in the case:

Boxwave used a special type of rubber that stays ‘grippy’ even if your hands are wet – preventing accidental drops…

In the end, the Slim Rubberized Shell Case is a lovely way to change the color of your Treo and make it easier to grasp without getting in your way otherwise. It’s protective effect is negligible, people who reset their Treo often will dislike the complicated removal process. If you can live with the weaknesses above, get this case for a reasonable 28$ from boxwave.com(available in black, green and silver).

OtterBox ships the 1921 in a well-padded box along with a detailed manual and a few spare parts. Most of the OtterBox can be replaced easily according to the manual – a truly excellent idea.

The 1921 itself is made of plastic and a rubbery substance that ’stops drops’ – Its overall look reminds me of the Aceeca Meazura: A variety of colors is available, too (yellow Meazura, anyone):

Inserting the Treo into the case is simple. First, the clamp on the back is opened in order to ‘eject’ the bottom. Then, the Treo is inserted. Afterwards, the bottom is installed again and the clamp is closed.

The case adds quite a bit of bulk to the Treo – here’s a picture of a Treo 650, a 680 and the case.

OtterBox did a great job at keeping the Treo usable in the case. Opening the glass door allows you to access the touch screen via a thin, clear membrane, the keyboard and side keys remain functional. A bottom door allows you to access the hotsync port.

The speakers and the headphone port have ‘cutouts’ covered with a special fiber that blocks dirt and water, but allows sound to pass through relatively unhindered. I would not insert headphones, though (see below).

A stylus can be docked into the side.

The camera gets a see-through window, however, the window significantly affects image quality. Also, the keyboard layout is fixed to QWERTY, and some of the alternative characters aren’t correct for a Treo 680.

The IR cutout is in the wrong place, too. The manufacturer claims that the case is not waterproof. However, it survived 15 secs under a strong beam of water without a single drop getting in…of course, the headphone membrane was intact and the sync door was closed firmly. OtterBox claims that the case survives drops from up to 1 metres. However, neither of these was tested with an actual Treo as OtterBox takes no warranty whatsoever for the devices inside.

Overall, the OtterBox 1921 transforms your Treo 680/750755p into a device that gets close to the Meazura (aka big blue tank) in terms of ruggedness…if the manufacturer would manage to certify the waterproofness. As it is now, the 1921 still is a good buy for everyone who’s Treo needs the extra protection.